Ultra Dent Tools, Inc.

A1B - 3' ULTRA VISION Portable Shop Light 110 Volt - $415.00
A1B2 - 3' ULTRA VISION Portable Shop Light 12 Volt - $425.00

The A1B Portable PDR Light is a super lightweight roll around shop light that is designed for the mobile dent technician. This light breaks down to fit in a 10 " x 10 " x 42" space and weighs only 19.5 lbs (21.5 lbs boxed weight). This light will extend up to 9 1/2' which is sufficient height for any truck or sport utility vehicle. The pivot head swings the boom 180°. The pivot collar adjusts with a simple thumbscrew. The light fixture spins 360° and you can set the pitch 45° in any direction on the pivot ball. Our custom 3' plastic V-Shield fixture provides the optimal angle to produce the broadest fade available and is scratch-resistant. Our light provides the single biggest advantage for doing quality PDR work. An optional white or neon yellow lens cover with black fade is available.

Patent Number US6854862B1.

Click for large image
Click for large image
Click for large image

Light Stand
A1B (110 Volt) and
A1B2 (12 Volt)
(A1B2 shown)

The A1B Lamp can be tilted to ULTRA positions to get that light where you NEED it!

12 Volt Hook-Up Shown Above
(Battery Connector, Battery Tray & Battery All Sold Separately)

110 Volt Lamp Shown
At Right (A1BAC)

12 Volt Lamp Shown
At Right (A1BDC)

 

Click for large image
A1BC Fixture Mounting Collars

This product is available with white or neon yellow lens cover with black fade (purchased separately)
Click for large image
The ULTRA Vision A1B and A1B2 Lights now come as a two-piece plastic fixture. This improves the fade and also allows you to be able to gain easy access to the inside of the fixture.

MEMO: FOR A1B SHOP LIGHT

 

ANYONE THAT HAD AN A1B LIGHT WITH THE BLACK PLASTIC HOUSING AND WHITE CURVED REFLECTOR SHIELD: THE BULB SOCKET LOCATION MAY NOT HAVE BEEN MOUNTED IN THE OPTIMAL POSITION. THEREFORE WE MADE A NEW MOLD TO RELOCATE THE SOCKET AND ALSO TO FLATTEN THE REFLECTOR SHIELD ANGLE. THESE IMPROVEMENTS WILL GIVE THE TECHNICIAN A BROADER FADE.

A QUICK REMEDY TO ENHANCE OR BROADEN THE FADE OF THE OLD CURVED FIXTURE IS TO DRILL OUT THE RIVET ON EACH END IN THE LIGHT SOCKETS AND RELOCATE THE SOCKETS ¼” ABOVE THE OLD POSITION BY USING JB WELD QUICK SET. THE SOCKET SHOULD SET ABOUT EVEN WITH THE TOP OF THE BLACK HOUSING. THIS SHOULD PROVIDE THE BEST OVERALL FADE FROM THE OLD LIGHT FIXTURE MOLD.

WE HAVE HAD A MULTITUDE OF REQUESTS FOR THE OLD STYLE ALUMINUM FIXTURES BECAUSE OF THE BULB LOCATION. THE NEWEST DESIGN IS IDENTICAL TO THE ALUMINUM FIXTURE BUT IN ABS PLASTIC WHICH IS LIGHTER AND SCRATCH RESISTENT.

WE HAVE ALSO MODIFIED THE A1BC COLLAR TO PROVIDE FAR STRONGER HOLDING OF THE LIGHT FIXTURE ASSEMBLY, TO PREVENT OVERTIGHTENING, AND ELIMINATE THE POSSIBLE RELEASE OF THE LIGHT FIXTURE FROM THE COLLAR.

 

 

Ultra Dent Tools, Inc.

"Ultra Dent Tools: Designed by Professionals for Professionals"

Ultra Dent Tools, Inc.®
555 Main St, Ste C
Riverside, CA 92501-1031
Phone: (951) 784-9905
Fax: (951) 784-9906


General Contact E-Mail
sales@ultradenttools.com

Current Patent(s):
Patent Number USD443192S

Patent Number US6854862B1

Questions or Problems with Our Website?
Please E-mail Our webmaster@ultradenttools.com

This Website is Best Viewed at a Resolution of 1280x1024 or Higher
This Website is Best Previewed on a High Speed Internet Connection