Training Page

Training Videos are Available on the Accessories Page

Training students

Training Videos are Available on the Accessories Page

Learning the craft of paintless dent removal is a long-term training process, at best. This skill cannot be acquired in one, two, or even three weeks of training. With this in mind, Ultra Dent Tools has created a training program that is very comprehensive and detailed about the process. Our three-day class is a condensed 24-hour, hands on training program that will give you all the proper information about how this process works.

You will be taught the optimal techniques, with the latest state of the art tools and equipment. We will welcome any tools or equipment you already have, and can help you make the most use from them. We recommend that you do not have any vision problems, and that your manual dexterity is good. Be prepared to apply yourself and we will progress you as fast as you are ready.

See you in class!

Sincerely,

Steve Hopf
President
Ultra Dent Tools

Training Videos are Available on the Accessories Page

BASIC PDR TRAINING CURRICULUM

Classes will cover these subjects:

• Introduction to PDR and dent demonstrations. Chalkboard fundamental overview. Use of light systems. Reading the light. Tool tip location exercises.
• Removing minor dents in open areas. Introduction to side panel dents. Demonstration and techniques on side panels.
• Removing minor dents in braced areas. Door access ~ removing door panels. Fender and quarter panel access ~ removing trim panels, tails lights, etc.
• Best tool and accessory choices for optimum results. Drilling and non-drilling situations. Color sanding and polishing. Glue pulling tricks and techniques.

Final dent test: Students are required to remove a small dent from start to finish. Performance is critiqued by instructor(s).This is an intense, all hands-on training course, starting with demos, then instructor-assisted training on each subject. Students may bring their own tools and lighting systems, if they prefer, or Ultra Dent Tools will provide them at no charge.

Class Schedule:	Fri - 8:00 AM to 5:00 PM Sat - 8:00 AM to 5:00 PM Sun - 8:00 AM to 5:00 PM
Cost is:	$1, 500.00 per student

A 15% discount on individual tools and accessories (10% on sets) will be offered during the training course.
Ultra Dent Tools provides tools, equipment and accessories to use for training. The training tuition covers training only and does not include the direct purchase of any tools, equipment or accessories, travel, food or hotel expenses.

Training Videos are Available on the Accessories Page

ADVANCED PDR TRAINING CURRICULUM

Classes will cover these subjects

• Sharp Dents
• Large Dents
• Body Line Dents
• Creases
• Aluminum Panels
• Hard Access Dents ~ including sunroofs, roof rails and triple-paneled areas.
• Glue Pulling Systems

Final exam will be a test on any of the three levels of Vale National Certification Program sized dents - Journeyman, Craftsman, Master Craftsman.

This is an intense, all hands-on training course, starting with demos, then instructor-assisted training on each subject. Students will be given dents to remove on each subject.

Students may bring their own tools and lighting systems, if they prefer, or Ultra Dent Tools will provide them at no charge.

Class Schedule:	Fri - 8:00 AM to 5:00 PM Sat - 8:00 AM to 5:00 PM Sun -8:00 AM to 5:00 PM
Cost is:	$1, 500.00 per student

A 15% discount on individual tools and accessories (10% on sets) will be offered during the training course.
Ultra Dent Tools provides tools, equipment and accessories to use for training. The training tuition covers training only and does not include the direct purchase of any tools, equipment or accessories, travel, food or hotel expenses.

Training Videos are Available on the Accessories Page

BUMPER & TOUCH-UP PAINT TRAINING

This two-day class is hands-on repair, prep, micro spot blend and complete bumper painting. It also includes minor paint touch-up painting! Our instructor will show you how to repair different types of bumper covers. You will learn the tricks & techniques to blending corners and sections of bumpers with undetectable results. Get trained by seasoned professionals in the lucrative and growing industry that is in great demand worldwide. The training tuition covers training only and does not include the direct purchase of any tools, equipment or accessories, travel, food or hotel expenses.

Class Schedule:	Sat - 8:00 AM to 5:00 PM Sun -8:00 AM to 5:00 PM
Cost is:	$1, 500.00 per student

A 15% discount on individual tools and accessories (10% on sets) will be offered during the training course.

Training Videos are Available on the Accessories Page