• Contact us
  • Fhl38:  The Fatty Elim A Dent 38X 14 Adjustable Fade Hail Light 12V
    Move your mouse over image or click to enlarge
    Fhl38:  The Fatty Elim A Dent 38X 14 Adjustable Fade Hail Light 12V FHL38 : THE FATTY ELIM A DENT 38"X 14" ADJUSTABLE FADE HAIL LIGHT 12V FHL38 : THE FATTY ELIM A DENT 38"X 14" ADJUSTABLE FADE HAIL LIGHT 12V FHL38 : THE FATTY ELIM A DENT 38"X 14" ADJUSTABLE FADE HAIL LIGHT 12V FHL38 : THE FATTY ELIM A DENT 38"X 14" ADJUSTABLE FADE HAIL LIGHT 12V FHL38 : THE FATTY ELIM A DENT 38"X 14" ADJUSTABLE FADE HAIL LIGHT 12V FHL38 : THE FATTY ELIM A DENT 38"X 14" ADJUSTABLE FADE HAIL LIGHT 12V FHL38 : THE FATTY ELIM A DENT 38"X 14" ADJUSTABLE FADE HAIL LIGHT 12V FHL38 : THE FATTY ELIM A DENT 38"X 14" ADJUSTABLE FADE HAIL LIGHT 12V FHL38 : THE FATTY ELIM A DENT 38"X 14" ADJUSTABLE FADE HAIL LIGHT 12V FHL38 : THE FATTY ELIM A DENT 38"X 14" ADJUSTABLE FADE HAIL LIGHT 12V

    FHL38 : THE FATTY ELIM A DENT 38"X 14" ADJUSTABLE FADE HAIL LIGHT 12V

    3 reviews   |  
    • $700.00


    FHL38 : THE FATTY ELIM A DENT 38"X 14" ADJUSTABLE FADE HAIL LIGHT 12V

    THIS PRODUCT IS DROPPED SHIPPED DIRECT FROM ELIM-A-DENT 

    DESCRIPTION :

    The Fatty Elim A Dent 38" x 14" Adjustable Fade Hail LIght

    Built in Dimmer on light  !

    ITEMS INCLUDED - 

    • 1 Inch Ball compatible with Ultra Collar A1BC2-5
    • Custom Power Cables With Alligator Clamps
    • Fatty 38" x 14" Light Head


    DOES NOT INCLUDE -

    • Collar, Stand, or Battery.

    Light works well with Ultra Collar - A1BC2-5


    Fully compatible with Ultra Light Stands

    WARNING
    You cannot run more than 6 LED strips at one time, doing so will cause the light to overheat damaging the product.

    THE FATTY ELIM A DENT 38"X 14" ADJUSTABLE FADE HAIL LIGHT 12V

    The company who revolutionized the mini pdr light game has now brought new tech to hail lighting. We spared no expense inside and out of this evolutionary product.

    First of its kind Injected Molded housing using a military grade plastic blend with aluminum reinforcement. We packed this bad boy with 10 LED strips to cover the entire wide face ensuring coverage from end to end. We used a custom built low resistance led that offer crisp, bright, and efficient lighting. These LED are currently only offered by us and require a driver circuit to power them properly. Matching LED to our driver creates a consistent light output throughout the entire discharge cycle. No more straining your eyes halfway through a hail vehicle repair only to find out the light has dimmed due to low battery. Whatever brightness level you set, it will retain until the battery reaches its low voltage state.

    The Fatty light will run a light pulse sequence when the battery voltage is getting near the end of its capacity. It will alert the tech by flashing the light 2 times followed by a pulse every 15 minutes that the battery voltage is low. To prevent damage to the battery from a deep discharge the hail light will automatically start dimming the light once the battery hits a critical level. It will dim the light until the battery goes above the critical level or the light turns off. If you need a brighter light, you can turn strips off and the light will automatically increase its brightness until the battery hits its critical voltage.

    Our light has built-in battery protection preventing over discharge which shortens the life of your expensive batteries. There is a misconception that it's ok to drain commonly used batteries like deep cycle to low levels. This is the number one reason you not only have reduced run times after only a few uses but you limit the number of recharge cycles.

    We prefer to have an optimal running light that will work in sync with your batteries without causing damage to ensure a long life cycle of your investment. Because the light will maintain the output you set it to you will be able to work faster with less eye strain and fatigue.

    The Fatty Hail Light also comes with a 3 tier track system allowing you to adjust the fade to your liking. You can move the lens closer to led giving you that sharp contrast while magnifying the orange peel. Or you can move it out to soften up the fade giving you smoother and larger gray working area while making it easier to see the bottom of those deep dents.

    If that wasn't enough we also included a built-in dimmer along with 10 independent switches to control the 5 Warm White and 5 Cool White led.
    We included a quick latching door for easy lens swapping to change colors and patterns on the fly. Every Fatty light will also come with a 2nd door to replace the latching one with a permanent option. This is when you have found your perfect fade by adjusting height and lens options and no longer need the quick door.


    Sale

    Unavailable

    Sold Out

    Net Orders Checkout

    Item Price Qty Total
    Subtotal $0.00
    Shipping
    Total

    Shipping Address

    Shipping Methods