• Send Us a Message
  • Set #24A : 40 Piece Master Set 40 Tools/50 Accessories
    Move your mouse over image or click to enlarge

    Set #24A : 40 Piece Master Set 40 Tools/50 Accessories

      |  
    • $4,495.00


     

    Set #24 : 40 Master Set - 40 Tools & 50 Accessories

    Includes:

    0902 : 10" INLINE TWIST 45° ¾" THIN BLADE

    3603 : 12" RIGHT HAIL TWISTER 45° 7/8" THIN BLADE

    3605 : 8" STANDARD TWIST 90° 1 1/8" BLADE

    3613 : 18" RIGHT HAIL TWISTER 45° 7/8" THIN BLADE

    3613 : 18" RIGHT HAIL TWISTER 45° 7/8" THIN BLADE

    3616 : 20" STANDARD TWIST 90° 1 1/8" BLADE

    3620 : 30" STANDARD TWIST 90° 1 1/8" BLADE

    1401C : 1½" 0° SOFT TIP HAIL PISTOL

    1404 : 12" RIGHT HAIL TWISTER 45° 1" THIN BLADE

    1408 : 18" RIGHT HAIL TWISTER 45° 1" THIN BLADE

    1422 : 12" INLINE BENDABLE 90° 1 1/2 BALL TIP

    5601A : 15" STANDARD TWIST 90° 5/16" DIA . 3" BLADE

    5603A : 22" STANDARD TWIST 80° 5/16" DIA . 4.5" BLADE

    5608A : 22"ADJ BENDABLE HOOK 160° 5/16" DIA 6" BLADE

    5611A : 24" STANDARD TWIST 90° 5/16 DIA . 3" BLADE

    5616A : 18" BENDABLE HOOK 90° 5/16" DIAMETER 3-1/4"X2" BALL TIP

    5617A : 12" ADJ BENDABLE HOOK 160° 5/16" DIA 6" KNIFE EDGE BLADE

    5620A : 20" ADJUSTABLE HAIL TWISTER 45 DEG. 5/16" DIA. SHARP 1-5/8" THIN BLADE

    3804A : 24" STANDARD ADJ DOUBLE BEND ROD 65° 3/8" DIAMETER 4" X2-1/4" BLADE

    3805A : 24" HOOKED ADJ DOUBLE BEND 115° 3/8" DIA 4 X 2-1/4" BLADE

    3809A : 36" BENDABLE ADJ TWIST 45° 3/8" DIAMETER 3" BLADE

    3810A : 48" BENDABLE TWIST 45° 3/8" DIAMETER 3" BLADE

    7605A : 36" STANDARD DOUBLE BEND 65° 7/16" DIAMETER 6"X2-3/8" BLADE

    7606A : 36" HOOKED DOUBLE BEND 90° 7/16" DIA 6 X 2 3/4" BLADE

    1204A : 48" STANDARD DOUBLE BEND ROD 65° ½" DIAMETER 6" X 2⅜" BLADE

    ST3803A : 30" SOFT TIP DOUBLE BEND 90° 7/16" DIA . ADJ

    ST3810A : 24" ADJ BENDABLE DOUBLE BEND 65° 3/8 DIA. 4" X 2-1/4" SOFT TIP

    ST3811A - 24" X 3/8" BENDABLE 45° 3/8" DIA. 3-1/4" SOFT TIP W/ ADJUSTABLE JOINT , BENDABLE

    ST1207A : 42 " SOFT TIP DOUBLE BEND 90° 1/2" DIAMETER, ADJUSTABLE

    ST5802A : 52" BERTHA ROD 5/8" DIAMETER - THREADED HOLE AT 45° & TIP

    FT01 : 6" FLARE TIP 0° 1" HEAD 1/8" X 1/4" SHAFT

    FT05 : 20" FLARE TIP 0° 1" HEAD 1/8" X 1/4" SHAFT

    FT13 - 26" FLARETIP 0° 1 3/8" HEAD 1/8" X 5/16" SHAFT

    FT17 - 26" FLARETIP 0° 1/2" HEAD 3/16" X 1/8" SHAFT

    SHT2 : 24 " SHAVED TWISTER 65° 1/8" X 1/4" SHAFT 1" BLADE

    SHT5 : 48 " SHAVED TWISTER 65° 3/16" X 3/8" SHAFT 1 1/2 " BLADE

    56J2A : 5/16" X 18" ADJ BENDABLE JOHNSON 35° 1-3/4" BALL TIP

    38J3A : 3/8" X 24" ADJ BENDABLE JOHNSON 35° 2" SOFT TIP

    76J4A : 7/16" X 30" ADJ BENDABLE JOHNSON 35° 2-1/4" SOFT TIP

    12J5A : ½" X 36" ADJ BENDABLE JOHNSON 35° 2½" SOFT TIP

    A96B : 90° ALUMINUM ADJUSTABLE / INTERCHANGEABLE HANDLE

    A96D : SMALL (5-3/8") ADJUSTABLE/ INTERCHANGEABLE T-HANDLE

    A96E : MEDIUM (6-3/8") ADJUSTABLE/ INTERCHANGEABLE T-HANDLE

    A96F : LARGE (7-5/8") ADJUSTABLE/INTERCHANGEABLE T-HANDLE

    A98 - 1" X 2 1/4" KNURLED ALUMINUM HANDLE EXTENSION

    A4BDC : 24" 'ULTRA VISION' 12 VOLT SINGLE FLUORESCENT BULB, W/FLEX TUBE & 4.5" SUCTION CUP

    A8 : HAIL LEVER

    A13 : ALUMINUM HAIL HOOD PROPS

    A18 : ULTRA STAINLESS FELTED WINDOW SHIELD

    A19 : DOOR JAMMER

    A21B - ULTRA SERRATED SPATULA 8 " BLADE

    A23 : CHAIN HOOK WITH SPRING LINK

    A24 : WEDGE CURVED

    A25 : WHITE PLASTIC PUNCH WITH MAGNET

    A25A : HARD/SOFT BODY HAMMER

    A25PE PLASTIC PUNCH : PEEK W/2 MAGNETS ( HARD NON MARKING )

    A27B : 12-VOLT CIGARETTE PLUG CONNECTOR SHORT CABLE

    A28 - UPHOLSTERY CLIP REMOVAL TOOL

    A29 : SMALL DOOR PANEL & CLIP TOOL

    A32 : 1/4" ROPE RATCHET (8 FT LENGTH)

    A34S : NEW LIGHTER 3LB STEEL SLIDE HAMMER

    (10) A35 : SOFT TIP VINYL PUSH-ON CAP ¼"

    (10) A36 : SOFT TIP RUBBER PUSH-ON CAP 1/4"

    (10) A36D : X-SMALL HARD PLASTIC CAP FOR BLADED TOOLS - 3/16" & 1/4

    (10) A36E - SMALL HARD PLASTIC CAP FOR BLADED TOOLS - 5/16"

    (10) A36F - MEDIUM HARD PLASTIC CAP FOR BLADED TOOLS - 3/8"

    (10) A36G - LARGE HARD PLASTIC CAP FOR BLADED TOOLS - 7/16"

    (10) A36H - X-LARGE HARD PLASTIC CAP FOR BLADED TOOLS - 1/2"

    A37 : STAINLESS SOFT TIP KNOCKDOWN PUNCH W/ 2 (A35) & 2 (A35U)

    A44C : 7/16" SCREW-ON EXTENSION SET - 1" & 2" LENGTH

    A45C : 1/2" SCREW-ON EXTENSION SET - 1" & 2" LENGTH

    (2) A44M : 7/16" STAINLESS MEDIUM POINT SCREW-ON TIP

    (2) A44P - 7/16" SCREW-ON PENCIL POINT

    (2) A44SG : SCREW-ON SOFT TIP GROOVED FOR A35U SNAP ON CAP

    A44THM - BRUSHED FINISH ALUMINUM TOOL TIP HOLDER WITH EMBEDDED MAGNETS

    A47D - PDR INSTRUCTIONAL VIDEO 1.5 HRS DVD

    A48D - GLUE PULLER INSTRUCTIONAL VIDEO 22 MIN - DVD

    A49D - BODY SHOP TRAINING VIDEO 30 MIN - DVD

    A69DC : 12 VOLT GLUE GUN

    A72 : STANDARD BLACK "PDR" GLUE STICKS, "WURTH" 10 PACK

    (7) A75 : ULTRA 5/8" SMALL PULL TAB

    (3) A76 : ULTRA 13/16" MEDIUM PULL TAB

    (3) A77

    (3) A78

    (2) A79

    A109

     


    Sale

    Unavailable

    Sold Out

    Net Orders Checkout

    Item Price Qty Total
    Subtotal $0.00
    Shipping
    Total

    Shipping Address

    Shipping Methods